Slip test before handover, practical completion or occupancy
The floor is down. The specification named an AS 4586 class. The certifier, client or building manager now wants proof of the surface people will actually walk on. That is a slip test before handover: a pendulum test of the new floor, on site, to AS 4663:2013.
What you receive is a slip test report. In most handover packs that document is what people mean by a slip resistance certificate. If a location falls short, the same report tells you so, and there is a path to rectify and retest before you close the job. Call 1300 207 915 for a quote.
A new floor still needs a pendulum test in place
A factory sample and an installed floor are not the same surface. Grout haze, sealer, adhesive film, builder's clean chemicals and the first week of traffic all change grip. A datasheet P4 can sit lower once it is laid. That is why handover, practical completion and occupancy files ask for an on-site result, not a reprint of the product brochure.
Slip Audit brings the wet pendulum to the site and tests the floor in the condition you intend to hand over. Locations that stay dry in service can be paired with dry floor friction in the same visit. Both methods sit in AS 4663:2013. The class on the datasheet came from AS 4586. They answer different questions.
If you are still pricing the job rather than closing it, start at slip testing for builders and tenders.
Typical handover locations
- Entry foyers and lobby stone that will see wet weather
- External paths, ramps and landing edges
- Stair treads, nosings and fire stairs
- Bathrooms, changerooms and other wet rooms
- Commercial kitchens and servery floors
- Any surface the specification named a P or R class for
The document most files call a certificate
- Each test location, described precisely
- Method: wet pendulum or dry friction, and conditions
- Readings and the P or D classification
- Comparison against HB 198:2014 for that location type
- A plain-English finding you can put in the PC pack
- A next step where a surface falls short
The full list of what that file contains is on certificate of slip resistance.
A slip test report, not a one-line stamp
Search "slip resistance certificate" or "slip test certificate" and you will see both phrases used for the same thing: a written record of how the installed floor performed. We issue a report. It names the location, the method, the class and the finding. That is the slip test report a certifier or client can file. It is not a generic pass card with no locations attached.
If someone on the project asks for a certificate of slip resistance, send them the report page so they can see the contents before the visit. The report is the deliverable you hand over with practical completion documents.
What happens if the floor fails
A fail is a result against guidance or against the class the specification named, not a missing piece of paper. You still receive the report. That matters: a documented shortfall with a next step is better evidence than an empty folder when a certifier or client asks why the floor was not tested.
The report ranks the finding and explains it in plain English. Premrest can issue a scope of works and quote in the client app to lift grip with a slip treatment or non-slip coating suited to the substrate and the target class. You can accept that scope or take it to another contractor. After the work, we retest so the improvement is on the same record.
There is no promised class and no promised program date on this page. Rectification depends on the surface, the location and site access. The practical guide to triage and options is what to do when a floor fails a slip test.
Leave time in the program
Book the first pendulum test of the new floor once it is clean and in handover condition, not the morning of the PC inspection. If a location is below the specified class, you will want a window for treatment and a retest before occupancy.
After-hours visits are available where a live site cannot spare the area during the day. Call 1300 207 915 for a quote if the window is tight and you need the visit scoped against other trades.
Melbourne, Sydney, Brisbane, and Perth by arrangement
We pendulum test new floors across Melbourne, Sydney and Brisbane. Perth and Western Australia are by arrangement only. Call 1300 207 915 for a quote if the site is in WA, or use the online quote and booking flow for the three east-coast metros. We confirm every booking within one business day.
Questions builders ask in the last weeks of a job
When should I book a slip test before handover?
Book once the floor is laid, cleaned of installation residue, and in the condition occupants will walk on, and before the practical completion or occupancy inspection that asks for evidence. Leave enough program time for a retest if a location falls short of the specified class. Call 1300 207 915 for a quote, or use the online quote flow for Melbourne, Sydney or Brisbane.
Is a slip test report the same as a slip resistance certificate?
For an installed floor, yes in practice. Certifiers, clients and insurers who ask for a slip resistance certificate almost always mean a slip test report: each location, the method, the P or D classification, and a plain-English finding. Slip Audit does not issue a one-line pass stamp. The report is the document. See certificate of slip resistance for what it includes.
What happens if a new floor fails a pendulum test?
You still receive the report. A below-guidance or below-specification result is a finding, not a missing document. The report explains the result against HB 198:2014 and the class the job named. Premrest can provide a scope of works and quote in the client app to lift grip, and we retest so the improvement sits on the same record. You can also take that scope to another contractor. More detail: when a floor fails a slip test.
Is a product datasheet enough for practical completion?
Usually not. A datasheet describes a new sample under AS 4586:2013. Practical completion, occupancy and handover ask how the installed floor performs. Grout, sealer, polish and site cleaning change that. The document that answers the question is an on-site AS 4663:2013 pendulum test of the new floor.
Can you pendulum test a newly installed floor?
Yes. The wet pendulum is portable and is the primary on-site method in AS 4663:2013. We use it on newly laid tile, stone, vinyl, concrete and coated floors in the condition they will be handed over. Dry floor friction is added where a surface stays dry in service. Regular coverage is Melbourne, Sydney and Brisbane. Perth and Western Australia are by arrangement only.