Sydney · NSW

Slip testing Sydney

On-site floor slip resistance testing in Sydney for existing commercial floors. Testers measure surfaces with the AS 4663 wet pendulum and dry floor friction methods, then issue an AS 4663 test report. Get a quote or call 1300 207 915.

Updated 16 November 2026

On-site floor slip resistance testing in Sydney

Floor slip resistance testing in Sydney is done on the pedestrian surfaces people already walk on. A tester attends the site with wet pendulum and dry floor friction equipment rather than taking a sample away for laboratory classification. Existing floors are measured to AS 4663.

Where the surface is used wet, the wet pendulum test wets the floor and swings a rubber slider across it to produce a P classification. Where the surface stays dry in service, the dry floor friction test uses a portable tribometer and reports a D classification. The method is matched to how that part of the building is used.

After the visit you receive an AS 4663 test report. It records the method, the classification for each agreed location, and a plain-English finding you can file for WHS, insurers, strata or handover.

What you receive

  • On-site AS 4663 results for every agreed location
  • P classifications from the wet pendulum test, and D classifications where dry floor friction applies
  • Interpretation against SA HB 198:2014 for that location type
  • An AS 4663 test report — not a one-line pass stamp

Who needs commercial slip testing in Sydney

Commercial slip testing in Sydney is usually needed by building managers, strata committees, aged-care and healthcare operators, retail and shopping-centre teams, and builders before handover. Building managers and strata committees use it for common-property foyers, car-park ramps and wet rooms. Aged-care and healthcare operators test corridors, ensuites and dining rooms. Retail teams look at food courts, mall tiles and wet entries. Builders need an on-site test at handover so the installed floor, not the datasheet, is on the file.

If you are still choosing a finish that has not been laid, start with AS 4586. Once people are walking on it, the method is AS 4663:2013.

Typical Sydney clients

  • Strata and building managers of apartment and mixed-use towers
  • Property managers of commercial offices and end-of-trip amenities
  • Shopping centres and large-format retail
  • Hospitals, clinics and residential aged care
  • Hotels, clubs, pubs and commercial kitchens
  • Builders needing an on-site result at practical completion

What floor slip resistance testing involves

Existing pedestrian surfaces in Sydney are tested on site to AS 4663:2013. The wet pendulum test wets the floor and swings a rubber slider across it. The reading maps to a P classification from P0 to P5 — the same P ratings used to classify new materials under AS 4586. That is why a datasheet P4 and an on-site P4 look similar on paper: they are not the same evidence. Wear, sealer, polish and cleaning change the floor after it is laid.

The dry floor friction test uses a portable tribometer on surfaces that stay dry in service and reports a D0 or D1 classification. It says nothing about wet behaviour, so it is the wrong only-test for a harbour-facing entry or a change room. We match the method to the way the area is used, then interpret each result against SA HB 198:2014 (HB 198), the Standards Australia handbook that recommends a minimum classification by location type. A dry internal corridor and an external ramp are not held to the same number. More on how those pieces fit together is on our standards page.

What’s in the AS 4663 test report

  • Wet pendulum and, where it applies, tribometer results for every agreed location
  • P and D classifications, not a raw number with no context
  • A comparison with SA HB 198:2014 for that location type
  • An AS 4663 test report for insurers, WHS, strata and handover
  • Prioritised findings, and a path to treatment or coating plus a retest if a surface falls short

Sydney areas we cover

Commercial slip testing is booked by suburb, but the method does not change. We test across Greater Sydney. Sites outside metro Sydney can be quoted on request.

Sydney CBD & North Sydney

Office towers, retail arcades, hotel lobbies and end-of-trip amenities. Wet entries and polished stone are common trouble spots.

Parramatta

Government and commercial towers, shopping centres and transit-adjacent floors. Wet entries and polished stone are common trouble spots.

Western Sydney

Blacktown, Penrith, Liverpool and Campbelltown: warehouses, loading docks, large-format retail and civic buildings, plus the wet and dry mix on the same site.

Eastern Suburbs & Northern Beaches

Strata foyers, coastal hotels, clubs and wet entries. Salt, sand and afternoon storms make wet-pendulum results the ones that matter.

Beyond metro Sydney

Sites outside metro Sydney can be quoted on request.

After the report

A Sydney slip test is only useful if someone can act on it. The report ranks findings by risk. Surfaces that fall short of HB 198 guidance can be treated or coated — see slip treatment and non-slip coating — then retested so the new rating sits on the same record. That is the document you keep for the insurer, the strata meeting or the handover pack.

See the full service breakdown

Book commercial slip testing in Sydney

Tell us the site address and the areas you are concerned about. We scope the AS 4663:2013 test locations, schedule around your operations, and leave you with a report you can file.

FAQ

Sydney floor slip resistance testing questions

What is floor slip resistance testing?

Floor slip resistance testing measures how much grip an existing pedestrian surface provides. In Sydney, Slip Audit tests floors that are already installed using the on-site methods in AS 4663: the wet pendulum test, which produces a P classification from P0 to P5, and the dry floor friction test, which reports a D0 or D1 classification. Results are read against SA HB 198:2014 for that location type.

Which standard applies to existing floors in Sydney: AS 4663 or AS 4586?

Existing floors in Sydney are tested to AS 4663, the standard for pedestrian surfaces already installed and in use. AS 4586 classifies new surface materials, typically before they are laid. Wear, sealer, polish and cleaning change a floor after installation, so a datasheet classification is not the same evidence as an on-site AS 4663 result.

How long does an on-site slip test take?

How long a visit takes depends on the number of agreed test locations and how the building is used. A smaller scope can often be completed in a single site visit; a larger building takes longer. We confirm the scope and visit plan when we quote.

What do I get after a floor slip resistance test in Sydney?

You receive an AS 4663 test report. It sets out the method used, the P or D classification for each agreed location, a comparison with SA HB 198:2014 for that location type, and a plain-English finding. The deliverable is a test report, not a one-line pass stamp.

How do I book floor slip resistance testing in Sydney?

Call 1300 207 915 or request a quote using the quote form. Give the site address and the areas you are concerned about, and we will scope the AS 4663 test locations around how the building is used.

Get a quote for commercial slip testing in Sydney

Send the site address and the areas you are concerned about. We will scope the test locations and schedule a visit that suits the building.

Also servicing Melbourne and Brisbane.