On-site slip testing Melbourne
On-site floor slip testing for commercial buildings in Melbourne, to AS 4663:2013, from our Thomastown base across the CBD and metro. You get a P rating for every location, a report in plain English, and if a floor fails Premrest treats or coats it and we retest. Get a fixed quote online or call 1300 207 915.
Updated 3 November 2026
What an on-site slip assessment involves
An on-site slip assessment of a commercial building floor is a visit to the installed surface, not a laboratory test of a product sample. Existing pedestrian surfaces are tested in accordance with AS 4663:2013 using the wet pendulum and dry floor friction methods.
The wet pendulum test wets the floor and swings a rubber slider across it. The reading maps to a P classification from P0 to P5. The dry floor friction test uses a portable tribometer on floors that stay dry in service and reports a D0 or D1 classification. Each result is interpreted against HB 198:2014 for that location type, in plain English.
You receive wet pendulum and dry friction results, with P and D classifications, for every agreed location, plus a written report with prioritised recommendations. If a surface falls short, Premrest applies a slip treatment or non-slip coating and we retest.
Commercial sites we test in Melbourne
- Commercial buildings: offices, lobbies and managed buildings
- Retail: shopping centres, supermarkets and strip retail
- Aged care and healthcare: residential aged care corridors and healthcare facilities
- Industrial: warehouses and logistics sites
Local testing, backed by local floor care experience
Slip Audit is operated by Premrest (Premier Restorations Group Pty Ltd), a Melbourne-based commercial floor care company. Premrest teams work on commercial floors across Melbourne every day, from office towers and bank branches to retail and industrial sites, so when your slip test uncovers a problem, the advice on what to do next comes from people who deal with these surfaces for a living.
We test existing pedestrian surfaces in accordance with AS 4663:2013 using both the wet pendulum and dry floor friction methods, and every report interprets your results against the recommendations of HB 198:2014 in plain English.
Melbourne coverage
We service the Melbourne CBD and greater metropolitan area, including the northern suburbs around our Thomastown base, the inner city, the eastern and south-eastern suburbs, and the western growth corridors. Sites outside metro Melbourne can be quoted on request.
We test Melbourne entries, ramps, stairs, wet areas, retail floors and industrial walkways. Typical jobs: CBD office towers and end-of-trip amenities, shopping centre common areas, aged care corridors, and warehouses in the north and west.
What we test across Melbourne
Wet weather, polished lobby stone and heavy pedestrian traffic make entry zones and external surfaces the usual trouble spots in Melbourne buildings.
Commercial buildings
CBD office towers, lobbies, end-of-trip facilities and managed buildings.
Commercial slip testingRetail
Shopping centres, supermarkets and strip retail across the metro area.
Retail slip testingAged care
Residential aged care and healthcare facilities throughout Melbourne.
Aged care slip testingIndustrial
Warehouses and logistics sites in the northern and western industrial precincts.
Industrial slip testingWhat you receive
- Wet pendulum and dry friction test results, with P and D classifications, for every agreed location
- Plain-English interpretation against HB 198:2014 guidance
- Prioritised recommendations, ranked by risk
- Rectification by Premrest for any surface that falls short
- Optional retesting after rectification to document the improvement
Reports that lead to action
Most Melbourne building owners who order a slip test receive a table of pendulum numbers and nothing else. Our reports are different: every result comes with an explanation, a priority and a clear next step, and because Premrest is a commercial floor care company, fixing a failed surface is part of the service rather than your problem to solve. The scope of works and quote arrive in your client app.
Slip treatment and non-slip coating in Melbourne
A Melbourne slip test is only half the job if the floor is below the rating it needs. Premrest specifies and applies the slip treatment or non-slip coating that suits the surface and the target slip rating, then we retest.
If a Melbourne floor falls short
Premrest specifies and applies the slip treatment or non-slip coating that suits the surface and the target slip rating, then we retest.
Melbourne floor slip testing questions
Do you offer slip testing in Melbourne?
Yes. Slip Audit is based in Thomastown and provides on-site slip testing across the Melbourne CBD and greater metropolitan area. Existing floors are tested to AS 4663:2013 with both the wet pendulum and dry floor friction methods.
Can you apply a slip treatment or non-slip coating in Melbourne?
Yes. After the slip test, Premrest specifies and applies the slip treatment or non-slip coating that suits the surface and the target slip rating, then we retest.
What does an on-site slip assessment of a commercial building involve?
An on-site slip assessment visits the installed floor. Existing pedestrian surfaces are tested to AS 4663:2013 with the wet pendulum and dry floor friction methods. The wet pendulum test produces a P classification from P0 to P5. The dry floor friction test reports a D0 or D1 classification. Results are interpreted against HB 198:2014. You receive a written report for every agreed location, and if a surface falls short Premrest treats or coats it and we retest.
What do floor slip testing services in Melbourne include?
Floor slip testing services in Melbourne include on-site wet pendulum and dry friction tests to AS 4663:2013, P and D classifications for every agreed location, a plain-English report interpreted against HB 198:2014, prioritised recommendations, slip treatment or non-slip coating by Premrest if a floor falls short, and a retest. We service the Melbourne CBD and greater metropolitan area from Thomastown.
Do you do slip testing for commercial buildings and aged care facilities?
Yes. In Melbourne we test commercial buildings such as offices, lobbies and managed buildings, aged care and healthcare facilities, retail sites including shopping centres and supermarkets, and warehouses and logistics sites. Typical locations include entries, ramps, stairs, wet areas, retail floors, corridors and industrial walkways.
Is this product slip testing or on-site testing of existing floors?
This page is for on-site testing of existing floors to AS 4663:2013, the standard for pedestrian surfaces already installed and in use. Product slip testing of new materials is a different standard: AS 4586:2013 classifies new surface materials, typically in a laboratory, before installation. Wear, sealer, polish and cleaning change the floor after it is laid, so a datasheet classification is not the same evidence as an on-site result.
Where can I get slip resistance testing near me in Melbourne?
Slip Audit is based in Thomastown and provides on-site slip resistance testing across the Melbourne CBD and greater metropolitan area. Call 1300 207 915 or request a quote online.