Slip testing for builders pricing a tender
A slip testing tender is usually two documents wearing one line item. The specification talks in AS 4586 slip rating language (P4, R11, and so on). The work you have to price is on-site slip resistance testing for the builder: wet pendulum and dry friction tests to AS 4663:2013 on the floor you actually install.
Slip Audit tests existing and newly laid pedestrian surfaces in Melbourne, Sydney and Brisbane. Perth and Western Australia are by arrangement only. Call 1300 207 915 for a quote, or use the online quote flow when you already know the areas.
AS 4586 slip rating language, AS 4663 on-site testing
Architects and specifiers write finishes to AS 4586:2013. That standard classifies a new material, typically in a laboratory: wet pendulum classes P0 to P5, dry friction D0 and D1, and oil-wet ramp classes R9 to R13. When a tender says "AS 4586 P4" or "R11 to AS 4586", it is telling you which finish to buy and install.
It is not telling you how to prove the installed floor. Wear, grout haze, sealer, adhesive residue and site cleaning all change grip after the tile leaves the crate. The on-site methods sit in AS 4663:2013. That is the standard Slip Audit tests to: a portable wet pendulum test for P classifications, and dry floor friction for D0 and D1. An R rating cannot be measured on a floor that is already down.
Price the AS 4663 visit. Treat the AS 4586 slip rating as the target the specification set, not as evidence you can photocopy from a datasheet.
How the two documents show up in a tender
AS 4586 slip rating: the specified class for the new finish. Used to choose the product. Common wording: P3, P4, P5, R10, R11.
AS 4663 on-site testing: the method used once people can walk on the floor. This is the slip resistance testing a builder should allow for in the package.
Results on the installed surface are read against HB 198:2014 for that location type, and against any class the specification named. The standards guide sets the three documents side by side.
What to include in the price
- A count of test locations, not a lump "test the floor"
- Entries, stairs, ramps, landings and wet areas the spec or NCC flags
- Wet pendulum testing wherever the surface can get wet
- Dry friction only where the floor stays dry in service
- Access, inductions and after-hours windows on a live site
- A written report that names each location and the class achieved
The factors that move a figure are set out in what slip testing costs. We do not publish a rate card here. Call 1300 207 915 for a quote.
Do not price a datasheet as if it were a site test
The cheapest way to lose a slip testing tender later is to allow nothing, then discover the certifier or client wants an on-site pendulum result before practical completion. The next cheapest mistake is to allow one "test" for a whole building. Each location is a separate result that has to be measured and written up.
A useful allowance starts with the surfaces the specification, the NCC and HB 198:2014 actually care about: entries that get wet, external paths, stair treads and nosings, ramps, bathrooms and other wet rooms, commercial kitchens if they are in the job. Internal corridors that stay dry may need dry friction rather than water on a finished floor mid-program.
If the tender is silent on method, write AS 4663:2013 on-site testing into your submission and say so. That stops a later argument about whether a factory AS 4586 slip rating was enough.
Quote turnaround without a guessed timeline
We do not publish a guaranteed turnaround for every tender. Sites differ, and a figure that ignores access or location count is not a quote you can stand behind.
For a Melbourne, Sydney or Brisbane job where you already know the areas, the online quote and booking flow shows a fixed quote once you add those areas and a preferred time. There is no payment needed to send a booking request, and we confirm every booking within one business day.
For a slip testing tender that is still being scoped, a multi-building package, or a site outside those metros, call 1300 207 915 for a quote. Tell us the city, the floor types, the locations the specification names, and whether the visit has to sit around other trades. That is enough to scope a visit rather than guess a lump sum.
Once the floor is down and you need the visit itself, use slip test before handover.
Melbourne, Sydney and Brisbane, with Perth by arrangement
On-site slip resistance testing for builders is available across the Melbourne, Sydney and Brisbane metropolitan areas. Same method, same report shape, so a multi-city tender can be scoped as one conversation.
Perth and Western Australia are by arrangement only. Do not assume a standard metro visit applies. Call 1300 207 915 for a quote if the tender site is in WA.
What we need to quote a tender line
- Site city and whether access is metro or further out
- The AS 4586 slip rating the specification names
- A list or count of locations, or the drawings that show them
- Floor types: tile, vinyl, concrete, stone, timber, coating
- Whether trades will still be on site, and any after-hours constraint
Unsure how many locations to allow? That is part of the call. Sensible scoping beats testing every square metre or allowing none.
Questions estimators ask before they lock the figure
Is slip testing in a tender AS 4586 or AS 4663?
A slip testing tender usually mixes both. The specification calls up an AS 4586 slip rating for the finish you are installing: a P class from a wet pendulum, or sometimes an R class from a laboratory ramp test. The proof that the installed floor meets that intent is an on-site test to AS 4663:2013. Price the on-site work, not a datasheet reprint.
What should a builder include in the price for slip resistance testing?
Allow for the number of test locations, the mix of wet pendulum and dry friction methods, access and after-hours windows, travel to the site, and a written report that names each location and the classification achieved. Stairs, ramps, wet areas and entries are the locations tenders usually nominate. Call 1300 207 915 for a quote, or use the online quote flow for Melbourne, Sydney or Brisbane.
How do I get a quote for a slip testing tender?
The fastest path for a Melbourne, Sydney or Brisbane site is the online quote and booking flow, which shows a fixed quote once you add the areas to test. For a multi-site package, an incomplete specification, or a job in Perth or Western Australia, call 1300 207 915 for a quote. We confirm every booking within one business day.
Do you provide slip resistance testing for builders in Perth or WA?
Perth and Western Australia are by arrangement only. Regular on-site testing is in Melbourne, Sydney and Brisbane. Call 1300 207 915 for a quote if the tender site is in WA.
What does an AS 4586 slip rating mean in a builder's tender?
An AS 4586 slip rating is the classification of a new material, usually from a laboratory sample: P0 to P5 from a wet pendulum, D0 or D1 from dry friction, or R9 to R13 from an oil-wet ramp test. It tells you what to specify. It does not describe the floor after it is laid, sealed or cleaned. The rating that belongs in a handover file is measured on site to AS 4663.